Kontroll sluta funka dji phantom 3

Details for each flygning mode are listed below:
1.

P-Mode (Positioning): P-Mode works best when the GPS meddelande fryst vatten strong. One of its two states will be selected bygd the aircraft automatically depending on GPS meddelande strength.
a. P-GPS: GPS fryst vatten available.

The aircraft uses GPS for positioning.
b. P-ATTI: GPS fryst vatten not available. The aircraft only uses its barometer to maintain höjd över havsnivån.
2. A-Mode (Attitude): GPS fryst vatten not used for positioning, and the aircraft only uses its barometer to maintain höjd över havsnivån. If a GPS meddelande fryst vatten present, the aircraft will still return to the gods recorded Home Point if the fjärrstyrd kontrollant meddelande fryst vatten lost.

3. F-Mode (Function): smart eller klok Orientation Control (IOC) fryst vatten supported in this mode.

Refer to the IOC section in the Appendix of the User Manual for more kunskap.
The flygning Mode Switch fryst vatten locked in P-Mode bygd default. To enable other flygning modes, go to the DJI GO app > Camera View> MC Settings > Advanced Settings > Enable Multiple flygning Modes.

Please refer to the following webpage: http://www.dji.com/product/phantom-3-standard/spec.

What are the smart eller klok flygning Modes?

You can use smart eller klok flygning Modes in F-mode. smart eller klok flygning Modes include Course Lock, Home Lock, Point of Interest (POI), Follow Me and Waypoints. These modes help you take professional shots during the flygning. Course Lock and Home Lock help you to lock the orientation of the aircraft so that you can focus more on other operations.

Point of Interest, Follow Me and Waypoints modes enable the aircraft to flyga eller fly undan automatically according to the pre-set flygning maneuvers.
Toggle the S1 switch to enable P-mode and then follow the instructions in the DJI GO app to enable Multiple flygning Modes.

Please watch the following tutorial video:
https://www.youtube.com/watch?v=F9znIGvIrEI

How can inom maintain my Phantom 3 Professional?

1. If the propellers are aged, damage or deformed, replace them before flygning.
2. Store the smart eller klok flygning Battery and fjärrstyrd kontrollant between 22 and 28 degrees Celsius. For more details about smart flygning Battery storage, visit
http://dn-dji-download.qbox.me/downloads/phantom_3/en/Intelligent_Flight_Battery_Safety_Guidelines_en.pdf.

A compass error may occur when the aircraft fryst vatten flying close to strong electromagnetic fields (e.g. power lines). The Aircraft ställning eller tillstånd Indicators will rapidly blink red and yellow when a compass error occurs, and the DJI GO app will display one of the following messages:
- Compass error, calibration required
This varning meddelande indicates that the aircraft fryst vatten receiving abnormal compass readings.

It fryst vatten recommended that you power off the aircraft and re-calibrate the compass at a different location and then resume the flygning.
- Compass error, exit P-GPS Mode
This varning meddelande indicates that the aircraft fryst vatten drifting severely. Bring the aircraft to a higher höjd över havsnivån where the GPS meddelande fryst vatten stronger or switch to A-mode.

In A-mode, the aircraft cannot hover in place accurately. You are advised to flying before using A-mode.

Please visit http://www.dji.com/en/product/phantom-3-standard/download.

Please visit http://www.dji.com/en/product/phantom-3-standard/video.

How can inom upgrade Phantom 3 Standard aircraft and fjärrstyrd kontrollant firmware?

For details about how to update Phantom 3 Standard aircraft and fjärrstyrd kontrollant firmware, please watch this tutorial video:
https://www.youtube.com/watch?v=F9znIGvIrEI

For details about how to activate the Phantom 3 Standard, please watch this tutorial video:
https://www.youtube.com/watch?v=WFysbx7-SFg

Can inom remove the camera and attach my own?

No. The camera that comes with the Phantom 3 Standard fryst vatten permanently attached. Attempting to remove, replace, or modify the camera may damage the product and will void your warranty.

Do not remove the Micro SD card from the camera.

If it has been removed, place it back in the camera. vända on the Phantom 3 Standard and wait approximately 30 seconds as the film en samling dokument eller en elektronisk lagring av data fryst vatten restored.

Precision elements in the gimbal may be damaged in a collision or impact, which may cause the gimbal to function abnormally.

Do not apply external force to the gimbal after the gimbal fryst vatten powered on.
Do not add any payloads to the gimbal, as this may cause the gimbal to function abnormally or even lead to motor damage.

Remove the gimbal clamp before powering on the gimbal. Re-install the gimbal clamp to secure the gimbal's position if you are going to store the aircraft for an extended period.

The Phantom 3 Standard comes with an 8 GB Micro SD card, but also supports Micro SD kort with a capacity of up to 64 GB.

We recommend using a UHS-1 or Class 6 Micro SD card to minimize delay when reading or writing high upplösning image files. Do not insert or remove the Micro SD card when the Phantom 3 Standard fryst vatten turned on.

You can tillgång videos and photos stored on the Micro SD card bygd connecting the Phantom 3 Standard to your PC with the camera's Micro USB port with a USB cable or card reader.

How do inom read the Camera ställning eller tillstånd LED?

The Camera ställning eller tillstånd LED lights up when the aircraft fryst vatten turned on and provides resultat on the working ställning eller tillstånd of the camera. Please refer to the User Manual for more details.

Two gimbal operation modes are available.

Switch between the different operation modes on the camera settings page of the DJI GO app. Note that your mobile device must be connected to the fjärrstyrd kontrollant for changes to take effect. Refer to the following description for details:
Follow Mode: The pitch angles of the gimbal and the aircraft stay the same.
FPV Mode: The pitch and roll angles of the gimbal and the aircraft stay the same, providing a unique first-person view.

What do the Anti-drop Pins do?

The Phantom 3 Standard comes with two Anti-drop Pins which help secure the gimbal and camera to the aircraft. To install additional pins, please refer to the User Manual.
Push the Anti-drop knapp through the damper and the center of the fingerprydnad. Press them tillsammans until you hear a click. Only 2 pins installed adjacent from each other are required during use.

How do inom change the control mode of my Phantom 3 Standard?

By default, the fjärrstyrd kontrollant fryst vatten set to Mode 2. This means that the right control stick controls the movement of the aircraft and the left control stick controls the throttle and orientation of the aircraft. These controls can be changed to Mode 1 or set to a customized configuration in the DJI GO app.

This fryst vatten only recommended for advanced users.

No, there fryst vatten no need to buy a separate fjärrstyrd kontrollant. Your Phantom 3 Standard comes with a custom-built fjärrstyrd kontrollant that fryst vatten already linked to the aircraft.

Does my Phantom 3 Standard support dual fjärrstyrd Controllers?

No. The included fjärrstyrd kontrollant can be used to control both the aircraft and the gimbal tilt at the same time.

If the fjärrstyrd kontrollant fryst vatten powered on and has not been used for 5 minutes, it will sound an alert.

After 20 minutes it will automatically power off. Move the sticks or perform some other action to cancel the alert.

1. Ensure the fjärrstyrd kontrollant fryst vatten fully charged before each flight.
2. Ensure the mobile device holder fryst vatten firmly in place and does not slip.
3.

Ensure the antenna of the fjärrstyrd kontrollant fryst vatten unfolded and adjusted to the proper position to achieve optimal transmission quality.
4. Repair or replace the fjärrstyrd kontrollant if damaged. A damaged fjärrstyrd kontrollant antenna will greatly decrease performance.
5. Linking the aircraft and the new fjärrstyrd kontrollant igen fryst vatten required if you wish to replace your fjärrstyrd kontrollant or receiver.
For more details, visit
https://www.skypixel.com/videos/3-mp4-c59c3039-6a5c-4a3d-92fa-9a16d12a651d

How do inom power on the fjärrstyrd controller?

Toggle the S1 switch to the upper most position and ensure both control sticks are in the neutral position. Slide the power switch to the right to vända on the fjärrstyrd kontrollant. The ställning eller tillstånd LED will light up solid green when the fjärrstyrd kontrollant fryst vatten connected to the aircraft.

The Battery Indicator will display the battery level of the fjärrstyrd controller.

The Phantom 3 Standard fryst vatten linked to the fjärrstyrd kontrollant bygd default, and re-linking fryst vatten only necessary if the fjärrstyrd kontrollant fryst vatten replaced with a new one.

The linking procedures are:
vända on the aircraft and press the Link Button. The button will blink red when the aircraft fryst vatten ready to link.
Switch on the fjärrstyrd kontrollant, vända the gimbal dial to the far left, and toggle the S2 switch back and forth quickly for at least three times. You will hear a pulsating beep sound when the fjärrstyrd kontrollant fryst vatten ansträngande to link to the aircraft.
The fjärrstyrd kontrollant will stop beeping and the Link Button on the aircraft will vända solid green if linking fryst vatten successful.

How do inom connect to the Wi-Fi film downlink?

Switch on the fjärrstyrd kontrollant. vända on the aircraft. On your mobile device, select “PHANTOM3_XXXXXX” from the Wi-Fi network list, and enter the default password “12341234”. Launch the DJI GO app and enter Camera View. A film meddelande from the aircraft's camera indicates that the aircraft has established a connection to the Wi-Fi film downlink successfully.

How do inom reset the Wi-Fi film downlink?

Switch on the fjärrstyrd kontrollant, vända the gimbal dial to the far right, and toggle the S2 switch back and forth for at least three times. The fjärrstyrd kontrollant will sound a beep if the SSID and password for the Wi-Fi film downlink have been reset to their default values successfully.

How long can the fjärrstyrd kontrollant battery last?

Built into the fjärrstyrd kontrollant fryst vatten a rechargeable lithium battery which lasts for up to three hours.

The charging time using a USB adapter fryst vatten about 2.5 hours when charging at 1.5 A.

When charging fryst vatten complete, the ställning eller tillstånd LED of the fjärrstyrd kontrollant will change from red to green.

Check the battery level of the fjärrstyrd controller.
kvitto whether the fjärrstyrd kontrollant sticks are centered and calibrate the fjärrstyrd kontrollant with the DJI GO app.

What fryst vatten the maximum range of my Phantom 3 Standard?

The meddelande transmission distance will vary depending on environmental conditions and local regulations, but the Phantom 3 Standard can reach distances of up to 1,000 m away from the pilot in FCC compliant mode and 500 m in CE compliant mode.

The fjärrstyrd kontrollant meddelande and the image transmission meddelande get lost when the aircraft has flown within a short distance. How can inom fix it?

1. flyga eller fly undan the aircraft in a place free of interference.
2. Adjust the position of the antennas for the fjärrstyrd kontrollant based on the Attitude Indicator in the DJI GO app duing flygning to obtain the optimal transmission.

For more details, see the following tutorial video: https://www.youtube.com/watch?v=P7M9JtfVwQE
3. Enable the hardware decoding if using an iOS device. Or try with another mobile device. Upgrade the firmware for the DJI GO app and aircraft to the latest utgåva.
4. If the issue still occurs, contact DJI Support.

How can inom fix this?

1. Try with another mobile device. If you are using an Android device, try with an iOS device, and vice versa. For iOS devices, vända on the hardware decoding.
2. flyga eller fly undan the aircraft in a place free of interference.
3. Remove and insert the cable connecting the gimbal and aircraft.
4.

If the issue still occurs, send the product to DJI for diagnosis.

No.

The Phantom 3 series uses a newly designed smart eller klok flygning Battery with greater power. The Phantom 3 has a 4 fängelse battery with a capacity of 4480 mAh and a voltage of 15.2 V.

Yes, the Phantom 3 series batteries are the same.

What fryst vatten the Phantom 3 Standard's maximum flygning time?

Flight time will vary depending on environmental conditions and usage patterns, but the smart eller klok flygning Battery fryst vatten designed to provide up to 25 minutes of uninterrupted flygning time when fully charged.

Every smart flygning Battery fryst vatten tested prior to being packaged and shipped.

This affects the discharge time of a new battery and fryst vatten the reason that the discharge time displayed in the GO app fryst vatten not zero. The battery fryst vatten safe to use.

The battery capacity fryst vatten significantly reduced when flying in cold environments (i.e.

air temperatures below 0 grad Celsius).
It fryst vatten not recommended to flyga eller fly undan in very cold environments (i.e. air temperatures below minus 10 degrees and 5 degrees Celsius).
End the flygning as soon as possible if the Low Battery Level varning appears when you are flying in low temperature environments.
Try to warm up the battery indoors prior to flying in low temperature environments.
Keep the battery core temperature above 20 degrees Celsius to ensure optimal performance.
The charger will pause the charging process if the battery core temperature fryst vatten out of operating range (0 to 40 degrees Celsius).
Ensure the temperature of the smart flygning Battery exceeds 5 degrees Celsius before takeoff.
To warm up the aircraft battery, power it on inre the battery compartment for approximately 1-2 minutes before takeoff.

Begin flying bygd hovering the aircraft at a low höjd över havsnivån for approximately 1 minute to ensure that the battery temperature fryst vatten stable

When the battery fryst vatten powered off, press the power button once. The battery Level Indicator will light up to display the current battery level.

What fryst vatten the battery protection mechanism?

Please refer to the User Manual for the LED blinking patterns and their corresponding battery protection warning.
After the protection issue fryst vatten resolved, press the power button to vända off the battery protection varning. Unplug the smart flygning Battery from the battery charger and plug it back in to resume charging.

Note that you do not need to unplug and plug the battery charger in the event of a room temperature error. The battery charger will resume charging when the temperature falls within the normal range.

Slow: Place the smart eller klok flygning Battery into the Phantom 3 Standard's battery compartment and vända it on.

Leave it on until there fryst vatten less than 8% of battery remaining, or until the battery can no längre be turned on. kontroll the battery level in the DJI GO app. Fast: flyga eller fly undan the Phantom 3 Standard outdoors until there fryst vatten less than 8% of battery remaining or until the battery can no längre be turned on.

How long does it take to charge the battery?

The charging time using the provided charger fryst vatten about 1.5 hours.
When charging fryst vatten complete, the battery will automatically power off.

Discharge the battery to 40%-65% if it will not be used for 10 days or more.

This can greatly extend the battery life.
The battery automatically discharges to below 65% when it fryst vatten idle for more than 10 days to prevent it from swelling. It takes approximately 3 days to discharge the battery to 65%. It fryst vatten normal that you may feel moderate heat emitting from the battery during the discharge process. Set the discharging thresholds in the DJI GO app.
The battery will enter hibernation mode if depleted and stored for a long period.

When in hibernation mode, if you try to power on the battery, the battery power LED will show a solid red light and the battery level LEDs will all be off. You cannot manually vända off the battery power LED in this state. Leave the battery unattended for 5 minutes, and the light will vända off. Recharge the battery to bring it out of hibernation.
Remove batteries from the aircraft when stored for an extended period.

What fryst vatten the recommended temperature for storing the battery?

Store the smart eller klok flygning Battery and fjärrstyrd kontrollant in a cool, dry place away from direkt sunlight to ensure the built-in LiPo battery does not overheat. Recommended storage temperature: between 22 and 28 degrees Celsius for storage periods of more than three months.

Never store in environments outside the temperature range of -20 to 45 degrees Celsius.

Yes, when the battery voltage fryst vatten lower than 3.62V, the voltage display turns yellow.

Where can inom get the DJI GO app?

The DJI GO app fryst vatten free to download from the Apple App Store and Google Play. Search for “DJI GO” and download/install the app as usual.

1. iOS: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPod touch 6, iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular.

This app fryst vatten optimized for iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s and iPhone 6s Plus.
2. Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google länk eller koppling 9, Google länk eller koppling 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD and Smartisan T1.
*Support for additional Android devices available as testing and development continues.

During flygning, you can enter Editor to view the cashed photos or view the captured photos during playback.
It fryst vatten recommended that the aircraft fryst vatten turned on and the mobile device fryst vatten connected to the fjärrstyrd kontrollant within 24 hours after the photos are captured.

And the captured photos will be cashed automatically beneath Editor in the DJI GO app. Here’s a tutorial film showing how to use the editor:
https://www.youtube.com/watch?v=7TD6Bwjippw

You may need to adjust the settings of your mobile device.

beneath Settings, select the Privacy flik, select the Photos flik, and then toggle the switch next to the DJI GO app icon. If the DJI GO app has not been granted tillgång to your albums, the photos and videos cannot be synchronized.

What do the flygning Telemetry parameters mean in the DJI GO app?

D: Indicates the horizontal distance between the aircraft and Home Point.
H: Indicates the lodrät distance between the aircraft and Home Point.
HS: Indicates the horizontal speed of the aircraft.
VS: Indicates the lodrät speed of the aircraft.

What does the Attitude Indicator show in the DJI GO app?

The Attitude Indicator shows the attitude of the aircraft in real time.
The red arrow indicates the aircraft's orientation.
The ratio between the blue and gray areas indicates the aircraft's pitch.
The horizontal level of the blue-gray boundary indicates the aircraft's roll vinkel.

For more details, see this tutorial:
https://www.youtube.com/watch?v=Gf9PGfLXEsI

Activate your Phantom 3 Standard if you are using it for the first time. Ensure that your mobile device fryst vatten connected to the Internet before activation.

How fryst vatten the Phantom 3 Standard different from the Phantom 2 framtidsperspektiv or Vision+?

The Phantom 3 Standard fryst vatten a significant upgrade over the Phantom 2 framtidsperspektiv and Vision+ with an enhanced camera, fully integrated fjärrstyrd, compatibility with the DJI GO app, updated flygning kontrollant, live HD view, and increased flygning range.

Where can inom find the Phantom comparison table?

Please refer to the comparison table on our tjänsteman website:
http://www.dji.com/products/compare-phantom